Batch 3D printing
Plastic parts in batches without an injection mould. Our printers run in parallel, so lead time does not grow in step with quantity.

- Tooling
- none needed
- Batch size
- confirmed in the quote
- Repeatability
- identical settings for the whole batch
- Paperwork
- VAT invoice, NDA on request
3D printing or injection moulding
A mould pays for itself only at high volumes. For small batches 3D printing is cheaper because there is no start-up cost. We work out the break-even point for your part and say plainly when moulding is the better choice.
| Batch 3D printing | Injection moulding | |
|---|---|---|
| Start-up cost | no tool, only production setup | a steel or aluminium mould |
| Time to first parts | no wait for a tool | the time it takes to make the mould |
| Design change | a new file, at no extra cost | a change to the mould |
| Unit price at high volume | higher | lower |
| Surface | visible layer lines | smooth |
Consistency across the batch
- Fixed print settings per order and material from one lot per batch.
- A first article for approval of dimensions and appearance before larger runs.
- Agreed dimensions checked before dispatch. Typical FDM accuracy is about ±0.2 mm.
Designing a part for batch printing
A flat base
A part with one flat face sits firmly on the build plate and needs no supports, which saves print time and finishing work.
Chamfers, not fillets, at the bottom
A rounded lower edge needs support material. A 45° chamfer prints cleanly and looks much the same.
Overhangs up to 45°
Steeper overhangs need supports. Decide how the part will lie on the plate while you are still designing it.
Heat-set inserts
Threads that are screwed often belong in brass inserts. A thread cut straight into the plastic wears out.
The same part, order after order
On the first order we print a sample part, measure its critical dimensions and start the batch only once you approve it. The print profile is stored with the part and used on every printer that produces it.
A repeat order months later is printed from that same profile, so parts from different deliveries fit the same assembly. That is the difference between a batch and a series of one-off prints.
Repeat orders and delivery
We produce batches from a few dozen to several hundred parts. For regular demand we agree call-off orders: you ask for the next delivery and it matches the previous one.
- Files and settings stay on record, so the next batch follows the same specification.
- Delivery to every EU country, no customs inside the single market.
- Framework agreement and NDA on request, reverse-charge invoicing.
Ask about a batch
Attach a file or drawing and give the quantity, material and deadline. We reply with a batch price and lead time.
Common questions
What batch sizes do you handle?
There is no lower limit. The upper limit is economic: at very high volumes moulding is often cheaper, and we say so in the quote.
How long does a batch take?
It depends on part size, material and quantity, so we give the date together with the confirmed price. We split the batch across identical printers and print in parallel, so lead time does not grow in step with quantity.
Can I order the same part again later?
Yes. The print settings approved for your part are kept on record, so a repeat batch comes out the same as the first. For regular demand we agree the price and a delivery schedule.
Related
3D printing quote
Upload a model and see a guide price for your material and quantity at once.
3D printing materials compared
FDM plastics compared: PETG and PLA as standard, ABS, ASA, TPU and nylon on request.
Our print farm: Bambu Lab X2D printers
We print only on Bambu Lab X2D: one model, the same settings on every machine.
A file or just an idea? Either is enough to start.
Upload a model and see a guide price straight away, or tell us what you need. Written enquiries get a specific quote in reply.